Cattle and sheep spreader

Cattle and sheep spreader,
Cattle and sheep feeding trailer Cattle and sheep feed mixer truck Cattle and sheep hay cart Livestock silage feeding truck Cattle and sheep feeding cart Cattle and sheep feeding car,

Core Introduction

The feed spreader is installed on the chassis of the agricultural vehicle, and can be transported and fed by one person, greatly improving the degree of mechanization and feeding efficiency, and is suitable for large, medium and small cattle and sheep farms.
This product is suitable for feeding cattle and sheep. It has a short bulk material time, can retain the nutrition of the feed to the greatest extent, and can make carbohydrates, fats, cellulose and other nutrients: the whole source, the utilization rate. All the materials are controlled by hydraulic pressure, and the direction of the materials can be adjusted arbitrarily according to the needs during the forward process, and the operation is simple and practical.
The electric spreader is divided into single discharge port and double discharge port. The model is divided into 2 squares and 3 squares. The parameters are as follows:
2 cubic double outlet;
Appearance size (length * width * height) ≥ 3150 * 1500 * 2000; weight about 680 kg; walking motor: 1500 watts; auger motor; 1500 watts; spreading motor: 1000 watts; front tires 400-12;
Rear tire 500-12; low speed; 5 batteries, 60 volts; 80A.

2 cubic single export;
Appearance size (length*width*height) ≥3150*1400*2000; weight about 650 kg; walking motor: 1500 watts; auger motor; 1500 watts; sprinkler, front wheel table 400-12; rear tire 500-12; low speed ;5 batteries, 60V; 80A.

3 cubic double outlet;
Appearance size (length * width * height) ≥ 3650 * 1600 * 2000; weight about 780 kg; walking motor: 2200 watts; auger motor; 1500 watts; spreading motor: 1000 watts; front and rear tires 500_12; reversing voice; high and low speed ; 6 batteries, 72 volts

3 cubic single export;
Appearance size (length * width * height) ≥ 3650 * 1500 * 2000; weight about 780 kg; walking motor: 2200 watts; auger motor; 1500 watts; front and rear tires 500_12; reversing voice; high and low speed; 6 batteries 72 volts

The difference between electric spreader and diesel spreader:

Efficiency: Electric spreaders are generally more efficient than diesel spreaders. They utilize electric power, which can be harnessed more effectively for spreading operations, resulting in improved productivity and reduced fuel consumption. Environmental Impact: Electric spreaders are more environmentally friendly compared to diesel spreaders. They produce zero emissions during operation, contributing to lower carbon footprints and reduced air pollution. Noise Levels: Electric spreaders operate quietly, generating minimal noise pollution. In contrast, diesel spreaders tend to be noisier due to the combustion engine. Maintenance: Electric spreaders typically require less maintenance than diesel spreaders. They have fewer moving parts, eliminating the need for regular engine maintenance, oil changes, and filter replacements associated with diesel engines. Fuel Source: Electric spreaders rely on electricity as their primary power source, which can be obtained from renewable energy sources such as solar or wind power. In contrast, diesel spreaders rely on fossil fuels, contributing to carbon emissions and dependence on non-renewable resources. Cost: Electric spreaders may have a higher upfront cost compared to diesel spreaders due to the need for batteries or electrical components. However, they can provide long-term cost savings through reduced fuel and maintenance expenses. Flexibility: Diesel spreaders offer more flexibility in terms of refueling. They can be easily refueled on the go, whereas electric spreaders require access to charging stations or dedicated power sources. Durability: Diesel spreaders are often considered more robust and better suited for heavy-duty applications. Electric spreaders may be lighter and more suitable for smaller-scale operations. Government Incentives: In some regions, governments offer incentives and subsidies for transitioning to electric equipment, including spreaders. These incentives can offset the higher initial costs and make electric spreaders a more financially attractive option. Long-Term Sustainability: Electric spreaders align with the global push towards sustainable and eco-friendly farming practices. Choosing electric alternatives can contribute to a greener agriculture industry and help mitigate climate change.

Details of the spreader：

The left side is the spreading accelerator, which can control the output speed by stepping on the depth of the accelerator. The middle gear handle can adjust the high and low speed, and the right side is the mobile accelerator and brake of the vehicle.

The bottom is a wear-resistant and pressure-resistant weighing bridge, an independent motor controls the discharge, and mine tires can easily cope with rough and bumpy roads.

The battery adopts the national standard water battery battery, and the battery brand and type can also be specified, or it can be shipped without a battery. The battery is guaranteed for one year. If there is any problem, you can go through the quality assurance process and replace it for free.

Our Factory

Introducing the revolutionary Feed Cart for Cattle and Sheep – the ultimate solution for all your feeding needs! This innovative product is designed for convenience and efficiency, ensuring your livestock get the nutrition they need, when they need it.

Feed carts for cattle and sheep are carefully designed to meet the unique needs of cattle and sheep. With its durable construction and solid features, this feed cart can withstand the rigors of an agricultural environment. Its strong steel frame ensures long-lasting performance, while the heavy-duty wheels allow for easy handling on any terrain.

One of the outstanding features of this forage cart is its versatile design. With adjustable dividers and compartments, you can easily distribute feed to different groups of animals for efficient feed management. The feed cart also features a removable top cover to keep feed fresh and protected from the elements, ensuring that every morsel is delivered to your livestock in optimal condition.

Feed carts for cattle and sheep not only prioritize function, but also the well-being of the animals. Designed with the animal’s comfort in mind, the cart has a low loading height to minimize the risk of injury. Plus, the smooth surface and rounded edges ensure easy cleaning, reducing the chance of bacteria buildup and creating a healthy environment for your livestock.

To maximize productivity and minimize manual labor, this feed cart is equipped with a user-friendly control panel. This panel allows you to easily adjust the feeding process, including the amount and timing of feed distribution. This feature ensures that your cattle and sheep are fed regularly, resulting in a consistent and balanced diet.

In addition, the cattle and sheep feed cart utilizes cutting-edge technology to optimize the feeding process. With its smart sensor system, the cart automatically detects when the feed is low and triggers the replenishment process, eliminating the need for constant monitoring. This reliable and efficient mechanism keeps your livestock well nourished without your constant attention.

With the cattle and sheep feed cart, managing livestock feed has never been easier. This state-of-the-art product combines functionality, convenience and technology to ensure the perfect nutritional balance for your cattle and sheep. Say goodbye to manual feeding processes and embrace a simplified feeding system that saves you time and energy.

Purchase a cattle and sheep feed cart today and experience peace of mind knowing your animals are receiving the best possible nutrition. Improve your farming efficiency and take your livestock management to new heights with this game-changing innovation. Order today and witness the transformation of your farming operation!